- You cannot add "FeinTech VSP01204 HDMI Splitter Ultra HD 4K 60Hz HDR with Scaler - 2x1 HDMI Splitter with Built-in Scaler for Full HD and 4K Displays, HDCP 2.2, HDMI CEC, Supports HDR10, Dolby Vision, HLG" to the basket because the product is out of stock.
FeinTech VSP01204 HDMI Splitter Ultra HD 4K 60Hz HDR with Scaler – 2×1 HDMI Splitter with Built-in Scaler for Full HD and 4K Displays, HDCP 2.2, HDMI CEC, Supports HDR10, Dolby Vision, HLG
MSRP: £ 45.99
You save 65%
£ 15.99
Prices go up when the timer hits zero
Out of stock product
Want to be notified when this product is back in stock?
FeinTech VSP01204 HDMI Splitter Ultra HD 4K 60Hz HDR with Scaler – 2×1 HDMI Splitter with Built-in Scaler for Full HD and 4K Displays, HDCP 2.2, HDMI CEC, Supports HDR10, Dolby Vision, HLG
FeinTech VSP01204 HDMI Splitter Ultra HD 4K 60Hz HDR with Scaler – 2×1 HDMI Splitter with Built-in Scaler for Full HD and 4K Displays, HDCP 2.2, HDMI CEC, Supports HDR10, Dolby Vision, HLG
- Distributes an HDMI signal to 2 HDMI devices such as TV, projector, monitor or AV receiver
- Ultra HD compatible and downward compatible with low resolutions at input and output, supports 4K @ 60Hz you 4: 4: 4/ RGB as well as HDR10, Dolby Vision, HDR10+, HLG, also all sound formats
- Automatic Scaler for displaying 4K content on a full-HD device, scales 2160p to 1080p – ideal for mixed use of UHD TV and full HD display
- Integrated HDMI connection cable for HDMI source (pigtail, length 60 cm), 2 HDMI sockets for connection to UHD TV or supplementation. Supports HDMI-CEC between HDMI out 1 and HDMI source
- Note: If you wish to have an optimal output for the main device, while abstaining from the audio or video on the second device, we recommend using the splitter FeinTech VSP01201
Weight | 0.20 kg |
---|---|
Dimensions | 10 × 6 × 2 cm |
Colour | Black |
Condition | New |
*required
10 reviews for FeinTech VSP01204 HDMI Splitter Ultra HD 4K 60Hz HDR with Scaler – 2×1 HDMI Splitter with Built-in Scaler for Full HD and 4K Displays, HDCP 2.2, HDMI CEC, Supports HDR10, Dolby Vision, HLG
You must be logged in to post a review.
i_kko –
This product is an absolute bargain if you have a complicated AV setup. So in my case I have a CYP PU-8H8HBTE-4K22 HDMI matrix distributing various sources to TVs and Projectors around the house. Whilst most displays are now 4K, a few are still 1080p only. Without this item the signal from sources such as Sky Q would be degraded to 1080p only everywhere, however with this downscaler everything runs at its highest resolution. Specialist downscalers by firms like CYP cost many multiples of the cost of this item, yet this does the job perfectly adequately (especially given it is a stop gap until the final displays are upgraded as well). I can’t recommend this enough, a brilliant bargain product!
One person found this helpful
Sam –
Having a few other HDMI splitters, this is the one that worked for me.I use this to split my Sky Q output between a UHD primary TV and an HD TV connected via a 20m HDMI cable.This enables this functionality flawlessly by down scaling any UHD to HD for the HD TV.
Nick –
This product is perfect for me. It allows me to send a 4k signal to my monitor whilst sending a 1080p signal to a capture device (elgato)Easy and simple to use
Bob Peachey –
This is the third product of this type I tried and first to work as advertised so far. I have a 4k projector and 1080p TV both connected to Sony receiver. The problem I had was if I set sky Q to 4k it would not show picture on TV, I would have to go deep into sky q settings to set to 1080p, this product sorted this out. Other products I tried have complex switches but all I got was flashing TV picture, this product has no switches and just works.
K Wright –
The audio switch is digital and not physical, each time you power it on you have to press it to force HDR.Other than that it done the job. If you want to force an amplifier to stream Dolby Atmos for a 1080p device, this will do the trick! Great device.Small notice of blacks being compressed from 4k to 1080p, but it’s to be expected and you don’t notice after a while.
Sal R –
I’ve always loved the aesthetic of the Sony A7S 4K but I now use all my atomos 4k recorders on other camera rig set ups and I don’t like changing set ups or breaking down set ups I just have lots of cameras instead that I can just pick up with freshly charged batteries and shoot.I had an old ninja2 and spare rig parts that I wanted to use on my a7s but even tho I usually down sample to 1080p I missed the 4k downsampled quality so I bought the Lilliput 4k monitor to draw the 4k as the A7S doesn’t do it in camera.Unfortunately feeding the liliput feed into the ninja didn’t work so it didn’t give me 4k downsampled footage.So I bought this little device and it’s brought my old A7S back to life producing stunning imagery that stands out from all the latest camera images out there.Highly recommended and saved me a few hundred pound ny not having to purchase a new 4k recorder.
stuart –
If you are trying to have two different screens at two different resolutions, this is perfect. I had it unpacked and working with in minutes.
One person found this helpful
Sam –
Having a few other HDMI splitters, this is the one that worked for me.I use this to split my Sky Q output between a UHD primary TV and an HD TV connected via a 20m HDMI cable.This enables this functionality flawlessly by down scaling any UHD to HD for the HD TV.
Steve T –
Have tried 2 now both not great on the down scale side. The picture is clear but any dark areas on the screen have white speckled all over it
2 people found this helpful
Mr R. –
This unit Resolved a long standing problem with SkyQ signal being sent to both 4K and full HD TVs in the house.