3M Cushion-Mount Plus Plate Mounting Tape E1115H – 178mm x 23m (2 Rolls/Case) – High-Quality, Removable Tape for Flexographic Printing – Ideal for Process Printing with Halftone Dots
MSRP: £ 249.99
You save 74%
Original price was: £ 219.99.£ 64.99Current price is: £ 64.99.
Prices go up when the timer hits zero
Only 1 left in stock
3M Cushion-Mount Plus Plate Mounting Tape E1115H – 178mm x 23m (2 Rolls/Case) – High-Quality, Removable Tape for Flexographic Printing – Ideal for Process Printing with Halftone Dots
3M Cushion-Mount Plus Plate Mounting Tape E1115H – 178mm x 23m (2 Rolls/Case) – High-Quality, Removable Tape for Flexographic Printing – Ideal for Process Printing with Halftone Dots
Details
- Tan, flexo plate mounting tape has air release feature with high plate side adhesion
- 0.38 mm thickness
- Soft/Process
- Consistent caliper control allows the printer to use multiple foam densities on a print job to optimise print quality
- Easy Mount liner, has micro-channels in both adhesive surfaces. The crosshatched pattern allows air to escape from between the tape and cylinder/sleeve and between the tape and plate. The productivity is increased, total handling time is reduced and printing defects are eliminated
Mount your photopolymer plate to print cylinders with 3Mâ„¢ Cushion-Mountâ„¢ Plus Plate Mounting Tape E1115H. Our 0.38 mm tan, double coated foam tape has the air release feature with high plate side adhesion. It is used for high quality process printing.
3Mâ„¢ Cushion-Mountâ„¢ Plus Plate Mounting Tape E1115H with easy mount adhesive and higher plate side adhesive is created for mounting flexographic print plates to cylinders or sleeves. It provides high quality tone reproduction where process printing is important. Our Easy Mount liner creates micro-channels in both adhesive surfaces. The crosshatched pattern creates a continuous and permanent network of micro-channels in the adhesive, allowing air to escape from between the tape and cylinder/sleeve and between the tape and plate. The adhesive on the linered side (plate side) of the tape is designed for mounting photopolymer plates, has excellent holding power on-press and clean plate removal when demounting. The adhesive on the non-linered side (cylinder side) of the tape is designed for mounting to flexographic printing cylinders or sleeves, providing easy application when mounting and clean removability while demounting.
Suggested Applications
- Use for mounting flexographic print plates to print cylinders
Weight | 5.00 kg |
---|---|
Dimensions | 40 × 30 × 20 cm |
Condition | New |
*required